SOFT JET DARK Heat Transfer Paper

FOR INKJET PRINTERS

Soft Jet Dark is a premium inkjet transfer paper designed for the transfer of images to dark colored garments. It offers
the very best performance in durabillity, look ,feel, and ease of use.

PRINTING

( Do not Oversaturage with inks. It will not enhance transfer quality )

1. Do NOT mirror the image.
2. Load the paper so that the image will appear on the coated side of the paper. Print the image.
3. Trim away any unprinted paper around the image, if desired.
4. Slowly peel off the image from the supporting paper, starting with a small tear in the corner to make separating easier.

TRANSFERRING

( Using a Commercial Heat Press)

1. Place the transfer ON TOP of the pre-heated garment with the image facing up. Place the
parchment paper on top of the entire transfer. Press:
25 seconds at 375°F using medium pressure
2. Remove the parchment paper hot or cold.
3. Hand iron instructions are below.

FOR USE WITH:

( Ink Jet, Heat Press, Hand Iron OK, Dark Color)

WASHING INSTRUCTIONS: No special instructions needed.Wash and dry your transfer accourding to your fabric's normal wash instructions.

STORAGE AND HANDLING OF AW SOFT JET DARK HEAT TRANSFER PAPERS: Store in a cool, dry area and do not remove from carton or poly bag until your are ready to use.

Important: We thoroughly test each of our products on various substrates using different transfer equipment. However it is impossible for us to duplicate all variables using all substrates and transfer equipment. Therefore, it is essential that you test the paper prior to production using your equipment, methods and substrate material. Heat presses vary in accuracy. Conduct tests to determine the best time and temp. to use with your equipment. Please keep in mind that the Seller's and the Manufacturer's maximum obligation shall be to replace any paper that is proven to be defective. Neither the Seller nor the Manufacturer shall be liable for any injury, direct or consequential, arising out of the use of, or inability to use this paper.

USING A HAND IRON

1. Preheat iron 5 minutes on the highest setting. Do not use steam. ( Empty all water.)
2.Iron on a very smooth hard surface that is waist level or below. Do not use an ironing board.
Place a pillowcase on the surface and iron the pillowcase to remove any wrinkles.
3. Put the garment on the center of the pillowcase and iron it to remove wrinkles.
4. Place the transfer with the image side up in the center of the garment with the parchment paper on top.
4. Hand ironing is recommended only for T-shirts and light-weight fabrics.

Full Sheet Transfer:

• 1. Using 2 hands, firmly slide the iron up and down. In 60 seconds, make enough passes to completely iron the shirt 2 times. The iron should be halfway off the edge when the edges are ironed.
• 2. Using 2 hands, firmly slide the iron side to side. In 60 seconds, make enough passes to completely iron the shirt 2 times including all
  edges. The iron should be halfway off the edge when the edges are ironed.
• 3. For smaller transfer (one-half sheet or less) , the ironing time is reduced to 1 minute total. If transfer area is smaller than the iron, iron for 30 seconds with heavy pressure.
  

Paper Removal ( Cold or Hot Peel)

HOME

CONTACT US

ABOUT US

POLICIES

VIEW CART

HEAT TRANSFER VINYL - LETTERS/ NUMBERS/ DECO
INKJET ADHESIVE BACKED VINYL
INKJET PHOTOGRAPHIC PAPER
INK SYSTEMS
OKIDATA LASER PRINTERS
PLOTTER CUTTER
SIGN VINYL
SILK SCREEN CLEAR FILM--POSITIVES
HEAT PRESSES

BLANK MOUSE PADS
DAZZLE TRANS
SAMPLE PACKS
TRANSFER PAPER ,
HEAT TRANSFER PAPER,
HEAT TRANSFER VINYLl,
LASER TRANSFER PAPER,
INKJET HEAT TRANSFER PAPER,
IRON ON TRANSFER PAPER.